E.P. Algex

Biodegradable cleaner for removing algae, mosses, yeasts and moulds. Approval number: 12262 N

General description

E.P. Algex is the modern, practical answer to problems with removing moss, algae, yeast and mould deposits. E.P. Algex is not harmful to the environment (has no harmful after-effect or vapour effect) and can therefore be used before planting plants. It is safe to use on all sorts of surfaces such as roof tiles, marble, glass, flagstones, patio tiles, metals etc. E.P. Algex works fast and effectively and has a preventive effect.

Problem

  • algae, mosses and green deposits on paths, patios etc. often cause very dangerous situations: slipping for example
  • green deposits on walls are often an eyesore and give an uncared-for appearance
  • green deposits on glass, such as in greenhouses, block light, reduce the yield and increase heating costs
  • weathered windows are very difficult to clean thoroughly

The solution

E.P Algex works quickly and effectively. E.P. Algex has a very efficient preventive effect and prevents the growth of green deposits.

Special advantages

  • E.P. Algex works fast and effectively
  • E.P. Algex is safe to use on any surface
  • E.P. Algex is very economical to use
  • E.P. Algex penetrates deeply into porous materials such as stone etc.
  • E.P. Algex is environmentally friendly and biodegradable
  • E.P. Algex provides a long period of prevention
  • E.P. Algex also prevents the formation of mould and yeast

The application

E.P. Algex has been developed to remove moss, algae, yeast and mould from:

  • paths, pavements and property boundaries
  • flagstones, gravestones
  • marble
  • glass (greenhouses, sheds and hangars)
  • terraces of cafes, restaurants and hotels
  • roofs (roof tiles, both pantiles and flat tiles) and walls of buildings
  • seats
  • water reservoirs (not for drinking water)

Remarks

Read the safety information sheet for the proper use. In addition to combating green deposits, E.P. Algex is also used as a disinfectant and for use in coolant water systems, pasteurisation installations and other forms of process water (including the paper asdn cardboard industry): ask for the Resolution on Approval.

Working method

  • Mix E.P. Algex with water in a ratio between 1:1 and 1:200 depending on the purpose (consult your product adviser). Spray onto the surface to be cleaned.
  • Allow E.P. Algex to work for a few days
  • Then remove the green deposit with a brush, garden hose or pressure washer.
  • Then spray E.P. Algex over the surface once again to prevent recurrence
  • Do not rinse, just leave it to work
  • Repeat if necessary, depending on the situation
  • Do not apply E.P. Algex when it is raining: the product will be rinsed away and cannot work

Description from the Resolution on Approval:
To remove green deposits on windows and materials in empty greenhouses and warehouses. Spray or brush thoroughly with a 2.5% solution of this agent (2500 ml to 100 litres of water). Remove dead algae, dirt etc, but spraying with a high-pressure jet or by scrubbing. This subsequent cleaning does not necessarily have to be done soon because this agent does not have any harmful after-effect or vapour effect. For this reason, treatments can also be carried out until shortly before planting.
To prevent green deposits on windows and materials in empty greenhouses and warehouses.
Spray onto clean windows with a 2.5% solution of this agent (250 ml to 10 litres of water). As this agent has no harmful after-effect and little residue, no rinsing is necessary or permitted. This method of use combats the formation of green deposits for many months. If windows (including plate glass) are cleaned by hand (scrubbed), a 1.5% solution is sufficient (150 ml per 10 litres of water).
On walls, roofs, paved paths, flagstones and gravestones, windows, sleepers, garden furniture etc.
To remove and prevent green deposits on various surfaces. Spray, pour, brush or scrub with a 2.5% solution of this agent (250ml to 10 litres of water). Do not rinse. Do not spray or pour onto plants.

Packing

Eco-Point International products are packed in polyethylene H.D. or metal drums. When repeat orders are being delivered, used drums which are empty and not polluted are collected free of charge for recycling or reconditioning purposes. When incinerated, polyethylene has no harmful effect on the environment.


Eco-Point sprayers are made of PE: light weight, little raw material per bottle, low production energy consumption, virtually unbreakable and therefore long life, little waste during production and recycling, no harmful substances when incinerated, 100% recyclable. These sprayers have wide footing to improve stability and a handy graduation to simplify using.

Share this product......

Downloads

Packings

  • Verpakking: Green 10 litre drum
    Green 10 litre drum
  • Verpakking: Green drum 20 litres
    Green drum 20 litres
  • Verpakking: Drum 60 litres
    Drum 60 litres
  • Verpakking: Drum 200 litre plastic
    Drum 200 litre plastic
  • Verpakking: IBC 1000 litres
    IBC 1000 litres