Multisol 210 Plus

Safe, powerful, viscous cleanser for the removal of various adhesives, glues, tar, bitumen, coatings and resins, based on e.g. polyurethane’s, polysulfides, isocyanides or epoxies.

General description

Multisol 210 Plus is a safe, powerful viscous cleanser for the removal of various pollutions such as: adhesives, glues, remainders of resins, bitumen, tar, paints (also hardened) and ink remains. Besides, the product can be used to weaken or dissolve certain types of plastics and waxes. Its thickened composition means it can work into the pollution for a long time.

Problem

  • Very harmful solvents (such as methylene chloride) are commonly needed for the removal of bitumen protection layers.
  • Harmful and aggressive solvents with low flash points and/or high vapour pressures are also used for the removal of inks, glues, resins and paint remainders.
  • Fast evaporation of these solvents leads to a hazardous working environment (high concentrations in the air), which can cause O.P.S. (Organo Psycho Syndrome), i.e. brain damage through the inhalation of harmful solvents.
  • Heavy industrial pollution such as tar and bitumen are commonly removed with aromatic carcinogenic solvents.
  • Dirty machines and objects give a very neglected impression.
  • Pollution can cause damage to materials and stagnation of operational processes.
  • In case of cleaning maintenance of objects such as lock gates, layers of bitumen containing asbestos must be removed safely.

The solution

After intensive research Eco-Point has succeeded in developing an easily biodegradable product for removing various kinds of pollutions quickly and efficiently. The use of Multisol 210 Plus results in a cleaner, safer and more pleasant method of cleaning instead of methylene chloride, NMP and NEP.

Special advantages

  • Multisol 210 Plus is a very powerful cleanser
  • Multisol 210 Plus is biodegradable >90%
  • Multisol 210 Plus has a high flash point
  • Multisol 210 Plus, being not corrosive and not affecting the ozone layer (unharmful), is therefore much safer in use compared to methylene chloride
  • Multisol 210 Plus can be used safely on many different kinds of pollution
  • Multisol 210 Plus is silicone free
  • Multisol 210 Plus is ‘the’ alternative for many aggressive solvents such as methylene chloride or NMP (n-methylpyrrolidon) and NEP (n-ethylpyrrolidon)

The application

  • Cleaning (2-component-) glue mixers
  • Cleaning tools polluted with inks, paints, resins etc.
  • Cleaning dirty floors and machines
  • Removing resins/synthetic materials such as: polyamides, polyimides, polyesters, polystyrene, polyurethane’s etc.
  • Removing tar and bitumen pollution

Remarks

As Multisol 210 Plus may affect various surfaces, we advise to test at a less visible place first, before applying the product definitively. Multisol 210 Plus can cause neoprene, Buna-N rubber and natural rubber to dissolve or swell. As inhalation of the product can cause irritation we advise not to spray the product.

Seen its multipurpose characteristics, Multisol 210 Plus is suitable for the food processing industry.
It can play an essential role for food processing companies that have to work according to HACCP standards. Contamination is a “critical point” and must be kept under close surveillance. Multisol 210 Plus contributes to a controlled working environment.

*Is an independent German research institute that issues certificates for adequacy of cleaning products for the food industry.

Working method

Normally, Multisol 210 Plus is applied purely. It can be used by smearing or plunging.
• Smearing: apply by brush or roller on the surface that is to be cleaned. The required penetration time a.o. depends on the temperature (ideally the product should be applied at a temperature exceeding 20°C). Remove the layer that comes off with a spatula. Repeat if necessary and flush with water.
• Plunging: plunge the object in Multisol Plus NF and leave to penetrate for some time, then let it leak out and clean the object. If necessary repeat this procedure, flush with water or rub dry.

Packing

Eco-Point International products are packed in polyethylene H.D. or metal drums. When repeat orders are being delivered, used drums which are empty and not polluted are collected free of charge for recycling or reconditioning purposes. When incinerated, polyethylene has no harmful effect on the environment.
Eco-Point sprayers are made of PE or PET: light weight, little raw material per bottle, low production energy consumption, virtually unbreakable and therefore long life, little waste during production and recycling, no harmful substances when incinerated, 100% recyclable.

Share this product......

Packings

  • Verpakking: Bucket 10 litres
    Bucket 10 litres