Remosolv SE2

Fast-acting, low VOC cleaning agent for cleaning equipment that sprays paints, varnishes and coatings.

General description

Remosolv SE2 is a fast-acting cleaning agent made from biodegradable constituents. Specially developed to remove and flush out paints, varnishes and coatings in a safe, fast and eco-friendly way. Remosolv SE2’s safe and eco-friendly character makes it a revolutionary product and a replacement for many chemical strippers and solvents, such as acetone, alcohol, thinner and MEK, that are harmful to the environment and human health. A smart combination of raw materials has resulted in a cleaning agent that is long-lasting and low in VOCs. It moreover cleans the smallest cavities and bends really well.


Corrosive, very volatile, harmful and environmentally damaging products are often used when paints, varnishes or coatings have to be removed. Many of these products are based on substances such as methylene chloride, acetone, MEK, alcohol, ethyl acetate, thinner and toluene. These compounds are extremely harmful to people and the environment. Many of these substances make a substantial contribution to the development of organic psychosyndrome. Because of their high vapour pressure, these volatile substances are designated as VOCs (volatile organic compounds).

The solution

Remosolv SE2 has a mild smell, it is completely free of methylene chloride, ketones and aromatic hydrocarbons, and it is made from biodegradable constituents. Remosolv SE2 works fast, is safe to use and contains less than 5% VOCs.

Special advantages

  • Remosolv SE2 removes both wet and dried out paints, varnishes and coatings.
  • Remosolv SE2 has a mild smell and is therefore pleasant to use.
  • Remosolv SE2 contains very few VOCs (<5%) and as a result it is a healthy alternative to acetone, ethyl acetate, thinner and other volatile solvents.
  • Remosolv SE2’s high flash point also makes it safe to use.
  • Remosolv SE2 is economical to use because of its high solvent power.
  • Remosolv SE2 has low surface tension and this gives it excellent penetration in a range of small components. Developed specifically for cleaning spraying equipment.
  • Remosolv SE2 is free of silicones.
  • Remosolv SE2 limits the use of personal protective equipment.
  • Remosolv SE2 is 95% VOC free, which is beneficial for VOC recordkeeping, and a less volatile product is also more economical to use.

The application

Remosolv SE2 can be used for removing 2-component systems, for example, as well as alkyd systems. It is moreover suitable for removing varnishes, lacquers and certain types of adhesive.


Remosolv SE2 is a safe product, but it is nevertheless advisable to avoid lengthy contact with skin in connection with its powerful degreasing properties. Try it out first in the case of plastics and other sensitive materials.

Working method

Completely empty the reservoir of residues and partially fill it with Remosolv SE2 so that the pump can just circulate. Circulate for some time (minutes up to an hour). Remove the liquid and repeat if necessary.
Apply Remosolv SE2 evenly with a brush, use a spray or immerse the object in the Remosolv SE2.

It is also suitable for immersion applications, nozzles for instance. Its effectiveness can be supported by using ultrasonic equipment. Make sure that the temperature remains limited to 10°C below the flash point. Also consult the material safety data sheet for the right way to use it.
After use remove using a damp cloth or rinse off with water.
Any residues left after cleaning floors are easy to remove with a floor cleaning machine.

Consumption of material:

Depends on the system to be removed, the ambient temperature and the layer thickness.


Eco-Point International products are packed in polyethylene H.D. or metal drums. When repeat orders are being delivered, used drums which are empty and not polluted are collected free of charge for recycling or reconditioning purposes. When incinerated, polyethylene has no harmful effect on the environment.

Eco-Point sprayers are made of PE or PET: light weight, little raw material per bottle, low production energy consumption, virtually unbreakable and therefore long life, little waste during production and recycling, no harmful substances when incinerated, 100% recyclable.

Share this product......


  • Verpakking: Green 10 litre drum + valve cap
    Green 10 litre drum + valve cap
  • Verpakking: Green drum 20 litres + valve cap
    Green drum 20 litres + valve cap
  • Verpakking: Drum 60 litres
    Drum 60 litres
  • Verpakking: Drum 200 litre plastic
    Drum 200 litre plastic
  • Verpakking: IBC 1000 litres
    IBC 1000 litres